GTD Series

Loading Dock Ramps

a ground-to-dock loading ramp to be used with a dock door to move cars out of a building.

These ramps provide a cost effective solution to moving vehicles, forklifts, and product in and out of a building where ground level access isn’t an option. The Adapt-A-Ramp GTD Series Loading Dock Ramps will dramatically increase your productivity creating savings that will go straight to your company’s bottom line!

Request a Quote

Applications Include:

  • Equipment Rental Companies

  • Military bases

  • Building Supply Centers

  • Scrap Yards & Recycling Plants

  • Commercial Operations

  • Heavy Millwrighting Operations

  • Lumber Yards

  • Rail Yards

  • Heavy Industries

  • Most other loading and unloading applications

Loading dock with a ground-to-dock- loading ramp with a capacity of 35,000lbsm, anti-slip grating, and safety rails that prevent the forklift from driving off the side of the ramp.

GTD Series Loading Dock Door Ramp Specifications:

The GTD series ramps are available in a wide range of sizes and incline angles to accommodate your operational needs.

Most GTD series loading ramps are tailor-made to meet our customers’ requirements and accommodate important considerations such as door size, dock heights and vehicle ground clearances.

Chart with details about a lift or ramp, including load capacity, incline section starting at 24 feet, service width from 86 to over 120 inches, adjustable ramp height between 46 to 56 inches, upper lip plate hinge with 12-inch width, and dual speed leveling jack.

GTD Series Loading Dock Ramp Design Features:

The Adapt-A-Ramp GTD Series Loading Dock Door Ramps are equipped with several exclusive design features that will improve productivity and operational safety.

Black pickup truck on a blue and yellow dock ramp in an industrial area with a plain concrete wall and a red safety post nearby.

Cost Effective Dock Level Access

The Adapt-A-Ramp’s GTD Series Loading Dock Ramps are designed to facilitate safe access from ground level to your truck level loading dock. These ramps are often cheaper than constructing a concrete or asphalt on gravel type ramp and do not require a building permit to install. They also have the benefit of being portable allowing you to move the ramp when needed.

lip plate and tail plate features necessary on a loading ramp for operator efficiency and safety

Hinged Lip and Tail Plate

The hinged lip plate is designed to overlap on to the loading dock allowing for a safe transition from the ramp into your facility. The hinged tail plate at the lower end of the ramp creates a smooth passage on and off the ramp at ground level.

Gray pickup truck on a yellow and blue vehicle ramp outside industrial building.

Custom Built

Each Adapt-A-Ramp GTD Series Loading Dock Ramp is built custom to meet specific needs. These ramps are built in a range of widths, lengths, and load capacities to accommodate different vehicles and equipment. Important factors such as ground clearances are taken into consideration to avoid vehicles bottoming out at the transitions.

Learn more